FAN COIL UNITS CHILLED WATER
INTRODUCTION
Our fan coil units are designed and manufactured to suit low ceiling heights, compact elegant installations.
These fan coil units are manufactured in ISO 9000 certified facility and have wide range of capacities and air
flows to suit variety of applications including.
• Small residence
• Apartment houses
• Light commercial establishments
• Mosques
• Schools
• Hospitals
• High rise buildings
• Hotels and Motels
• Fine restaurants
The fan coils units provide flexibility of architectural design, economy of operation and space
usage, individual room control
FAN COIL UNITS CHILLED WATER
INTRODUCTION
Our fan coil units are designed and manufactured to suit low ceiling heights, compact elegant installations.
These fan coil units are manufactured in ISO 9000 certified facility and have wide range of capacities and air
flows to suit variety of applications including.
• Small residence
• Apartment houses
• Light commercial establishments
• Mosques
• Schools
• Hospitals
• High rise buildings
• Hotels and Motels
• Fine restaurants
The fan coils units provide flexibility of architectural design, economy of operation and space
usage, individual room control
Chilled Water Decorative Fan Coil Units
GENERAL FEATURES
Units are designed and manufactured to suit aesthetics of building. These units are designed for District cooling Applications
Applications :
► Small residence
► Apartment houses
► Light commercial establishments
►Mosques
► Schools
► Hospitals
► High rise building
► Hotel and Motels
► Fine restaurants
These units provides flexibility of architectural design, economy of operation and space usage, individual room control with privacy, quietness, versatility of location and installation and multiplicity of control systems. We are sure that above reasons will form the first choice for your equipment selection.
Technical Features:
► Manufactured from high grade Engineering plastic and corrosion resistant sheet metal
► Insulated to reduce condensation and noise levels
► High efficiency heat exchangers fabricated from seamless copper tubes mechanically bonded with Waffled fins for maximum heat transfer
► Low noise, with high efficiency cross flow blowers
► High efficiency, long life, high power factor, capacitor driven motor.
► Easy and flexible electrical wiring connections
Component Features:
► Coils
Cooling coils are manufactured from seamless copper tubes mechanically bonded to high efficiency waffled fins for maximum heat transfer. Coils are factory leak tested at 450 psig. Air vent is standard part of unit. Coils are rated in accordance with ARI 410
► Fan Motor
These machines are having centrifugal low noise fans direct driven by single phase PSC motor. These motors have internal thermal protection, low temperature rise and are high efficient. They have high power factor and operate almost noiselessly with permanent lubricated sleeve bearings
► Casing
Units are constructed of high quality plastic material with ribs to support the load
► Filter
The units are provided with standard high efficiency filters (washable type)
► Blowers
The blowers are statically and dynamically balanced to minimize vibration and reduce noise levels
Chilled Water Decorative Fan Coil Units
GENERAL FEATURES
Units are designed and manufactured to suit aesthetics of building. These units are designed for District cooling Applications
Applications :
► Small residence
► Apartment houses
► Light commercial establishments
►Mosques
► Schools
► Hospitals
► High rise building
► Hotel and Motels
► Fine restaurants
These units provides flexibility of architectural design, economy of operation and space usage, individual room control with privacy, quietness, versatility of location and installation and multiplicity of control systems. We are sure that above reasons will form the first choice for your equipment selection.
Technical Features:
► Manufactured from high grade Engineering plastic and corrosion resistant sheet metal
► Insulated to reduce condensation and noise levels
► High efficiency heat exchangers fabricated from seamless copper tubes mechanically bonded with Waffled fins for maximum heat transfer
► Low noise, with high efficiency cross flow blowers
► High efficiency, long life, high power factor, capacitor driven motor.
► Easy and flexible electrical wiring connections
Component Features:
► Coils
Cooling coils are manufactured from seamless copper tubes mechanically bonded to high efficiency waffled fins for maximum heat transfer. Coils are factory leak tested at 450 psig. Air vent is standard part of unit. Coils are rated in accordance with ARI 410
► Fan Motor
These machines are having centrifugal low noise fans direct driven by single phase PSC motor. These motors have internal thermal protection, low temperature rise and are high efficient. They have high power factor and operate almost noiselessly with permanent lubricated sleeve bearings
► Casing
Units are constructed of high quality plastic material with ribs to support the load
► Filter
The units are provided with standard high efficiency filters (washable type)
► Blowers
The blowers are statically and dynamically balanced to minimize vibration and reduce noise levels
LOW HEIGHT WINDOW AIR CONDITIONERS
LOW HEIGHT WINDOW AIR CONDITIONERS
ROOF TOP PACKAGE UNITS
Features
INTRODUCTION
Roof top package units have been developed & produced to provide not only the ultimate indoor
comfort, but also to guarantee long & trouble free operations.
Herein lies the reason for the choice of only the highest quality components and design strategies to
meet the most important objectives of high efficiency, reliability, flexibility, Easy Install ability,
serviceability, and affordability
OPTIONAL FEATURES
• Electric Heater
• Heat Pump
• Overload External protection for Blower
Motor
• Anti Ice thermostat
• Hydrophilic Fin for Evaporator Coil
• Copper Fins for Evaporator & Condenser coil
• Heresite Coated Condenser Coil
• Stainless Steel Drain Pan
• Filter Differential pressure Switch
• Overload External Protection for Compressor
& Condenser Fan
• Compressor Alternating Switch
• Hour Run Meter
• Fan Cycling Switch
• Low Ambient kit
• Rotolock Compressor
• Circuit breaker (MCB) for Compressor ,
Condenser Motor & Blower Motor
• Pump Down System
• Dual Adjustable Pressure Switch
• Hot Gas Bypass (with Solenoid)
• Pressure Gauges
• Oversized Blower Motor & Alternate Drive
Package
• PCB Controller
• Advanced Microprocessor Controller
• Adjustable Voltage Monitor
• UV Light
• Adjustable Pressure Switch
• IP55 Class F Blower Motor up to 12.5Tr
• IP55 Class F Condenser Motor Upto 15TR
• VFD for Blower Motor
• Soft Starter for Blower Motor
• Fire Alarm Interlock
• Volt free Contacts for compressor, Blower
ON/OFF/TRIP Status.
STANDARD FEATURES
• 2’’ Aluminum Washable filter
• Refrigerant : R 407C
• Power Supply : 380-415 V/3PH/50Hz
• High Pressure & Low Pressure cut out
• Weather resistant steel cabinet , qualified for
1000 Hours of Salt Spray test
• Reciprocating Compressor for 3TR
• Scroll Compressor for 4 TR up to 25TR
• Crank case Heater for Compressors
• Direct Drive Blower Motor Assembly for
3TR,4TR & 5TR
• Belt Drive Blower Motor Assembly for 6TR up
to 25 TR
• 1’’ PUFF Insulation Double skin type
• Thermostatic Expansion Valves
• Factory Wired with Single Point Power Input
• Coils are leak tested & Pressure Tested for 550
PSIG
• Condenser Fans are Propeller type Direct
Drive, draw through Vertical Discharge with Fan
guard mounted to the Panel
• All units are provided with Compressor Lockout
either by locking Relays or by High Pressure
control trip with manual reset switch.
• Condenser & Evaporator Coils are with Copper
Tubes and Aluminum fins.
• IP55 Class F Blower Motor for 15 TR and
Above
• IP55 Class F Condenser Motor for 18 TR and
Above
• Power Controller , High/Low Voltage , Phase
Loss/Reversal Protection
• All Units are designed to operate with 24V
Universal Thermostat
• Internal Motor Protection for Indoor & Outdoor
Motors
• Compressor protection against High Discharge
Temperature
ROOF TOP PACKAGE UNITS
Features
INTRODUCTION
Roof top package units have been developed & produced to provide not only the ultimate indoor
comfort, but also to guarantee long & trouble free operations.
Herein lies the reason for the choice of only the highest quality components and design strategies to
meet the most important objectives of high efficiency, reliability, flexibility, Easy Install ability,
serviceability, and affordability
OPTIONAL FEATURES
• Electric Heater
• Heat Pump
• Overload External protection for Blower
Motor
• Anti Ice thermostat
• Hydrophilic Fin for Evaporator Coil
• Copper Fins for Evaporator & Condenser coil
• Heresite Coated Condenser Coil
• Stainless Steel Drain Pan
• Filter Differential pressure Switch
• Overload External Protection for Compressor
& Condenser Fan
• Compressor Alternating Switch
• Hour Run Meter
• Fan Cycling Switch
• Low Ambient kit
• Rotolock Compressor
• Circuit breaker (MCB) for Compressor ,
Condenser Motor & Blower Motor
• Pump Down System
• Dual Adjustable Pressure Switch
• Hot Gas Bypass (with Solenoid)
• Pressure Gauges
• Oversized Blower Motor & Alternate Drive
Package
• PCB Controller
• Advanced Microprocessor Controller
• Adjustable Voltage Monitor
• UV Light
• Adjustable Pressure Switch
• IP55 Class F Blower Motor up to 12.5Tr
• IP55 Class F Condenser Motor Upto 15TR
• VFD for Blower Motor
• Soft Starter for Blower Motor
• Fire Alarm Interlock
• Volt free Contacts for compressor, Blower
ON/OFF/TRIP Status.
STANDARD FEATURES
• 2’’ Aluminum Washable filter
• Refrigerant : R 407C
• Power Supply : 380-415 V/3PH/50Hz
• High Pressure & Low Pressure cut out
• Weather resistant steel cabinet , qualified for
1000 Hours of Salt Spray test
• Reciprocating Compressor for 3TR
• Scroll Compressor for 4 TR up to 25TR
• Crank case Heater for Compressors
• Direct Drive Blower Motor Assembly for
3TR,4TR & 5TR
• Belt Drive Blower Motor Assembly for 6TR up
to 25 TR
• 1’’ PUFF Insulation Double skin type
• Thermostatic Expansion Valves
• Factory Wired with Single Point Power Input
• Coils are leak tested & Pressure Tested for 550
PSIG
• Condenser Fans are Propeller type Direct
Drive, draw through Vertical Discharge with Fan
guard mounted to the Panel
• All units are provided with Compressor Lockout
either by locking Relays or by High Pressure
control trip with manual reset switch.
• Condenser & Evaporator Coils are with Copper
Tubes and Aluminum fins.
• IP55 Class F Blower Motor for 15 TR and
Above
• IP55 Class F Condenser Motor for 18 TR and
Above
• Power Controller , High/Low Voltage , Phase
Loss/Reversal Protection
• All Units are designed to operate with 24V
Universal Thermostat
• Internal Motor Protection for Indoor & Outdoor
Motors
• Compressor protection against High Discharge
Temperature
ESMA HIEER SERIES
INTRODUCTION
These concealed Ductable Split Indoor & Outdoor units
have been developed & produced to provide not only
the ultimate indoor comfort, but also to guarantee
long & trouble free operations.
Herein lies the reason for the choice of only the highest quality
components and design strategies to meet the most important
objectives such as:
- EFFICIENCY
- RELIABILITY
- FLEXIBILITY
- EASY INSTALLABILITY
- SERVICEABILITY
- AFFORDABILITY
ESMA HIEER SERIES
INTRODUCTION
These concealed Ductable Split Indoor & Outdoor units
have been developed & produced to provide not only
the ultimate indoor comfort, but also to guarantee
long & trouble free operations.
Herein lies the reason for the choice of only the highest quality
components and design strategies to meet the most important
objectives such as:
- EFFICIENCY
- RELIABILITY
- FLEXIBILITY
- EASY INSTALLABILITY
- SERVICEABILITY
- AFFORDABILITY
DECORATIVE R410A SPLITS
DECORATIVE R410A SPLITS